Differences

This shows you the differences between two versions of the page.

--- general:qtiplot [2022-11-03 10:02] – [Intel (x86_64)] Klaus Weber
+++ general:qtiplot [2024-08-27 21:04] (current) – [Linux] Markus Rosenstihl
@@ Line 5: / Line 5: @@
   * the manual can be found [[https://www.qtiplot.com/doc/manual-en/index.html|here]]
   * tutorials are also [[https://www.qtiplot.com/tutorials.html|available]]
+<WRAP center round tip 60%>
+The newest packages can be found here: [[http://mirror.infra.pkm/qtiplot/]] (accessible in local net or via VPN)
+</WRAP>
+The QtiPlot owner has enabled the possibility that all persons having a valid e-mail license hosted by our institute (ending in '@pkm.tu-darmstadt.de') download the QtiPlot installer files directly from their website.
+The two steps login process is described below:
+  - Enter your email address in the password field on a login page (e.g. https://www.qtiplot.com/login_exe.html).
+  - A verification code together with a verification link is sent to the email address provided. Warning: the spam folder should be checked if the email with the verification code is not received.
+  - Once the validity of the email address is verified, the email address needs to be entered again in the password field.
+  - Done, the installation files can be download directly from their website.
 -----
 ===== Linux =====
-  * Ubuntu 22.04 and 22.10 (requires Qt 5.15 and Python 3.10): {{ :general:211022_qtiplot_1.1.1_x86_64_ubuntu22.04.deb |qtiplot_1.1.1_x86_64.deb}}
+[[http://mirror.infra.pkm/qtiplot/]] (accessible in local net or via VPN)
-  * Ubuntu 20.04 (requires Qt 5.12 and Python 3.8): {{ :general:211022_qtiplot_1.1.1_x86_64_ubuntu20.04.deb |qtiplot_1.1.1_x86_64.deb
-}}
-  * Ubuntu 18.04 (requires Qt 5.9 and Python 3.6): {{ :general:211022_qtiplot_1.1.1_x86_64_ubuntu18.04.deb |qtiplot_1.1.1_x86_64.deb}}
-  * Debian 11 (stable) (requires Qt 5.15 and Python 3.9): {{ :general:211022_qtiplot_1.1.1_amd64_bullseye.deb |qtiplot_1.1.1_amd64.deb}}
 ----
 ===== Windows =====
+Important: Python needs to be installed with the option to set the PATH variable and available for everybody. There are checkboxes at the very beginning, both need to be set!
-  * {{ :general:201022_qtiplot-1.1.1-win64-python310.exe |qtiplot-1.1.1-win64-python310.exe}} (requires [[https://www.python.org/ftp/python/3.10.7/python-3.10.7-amd64.exe|Python 3.10 64-bit]] installed for all users)
+  * {{ :general:030323_qtiplot-1.1.3-win64-python310.exe |qtiplot-1.1.3-win64-python310.exe}}(requires [[https://www.python.org/ftp/python/3.10.7/python-3.10.7-amd64.exe|Python 3.10 64-bit]] installed for all users)
   * qtiplot-1.1.1-win64-python310.msi (on request, requires [[https://www.python.org/ftp/python/3.10.7/python-3.10.7-amd64.exe|Python 3.10 64-bit]] installed for all users)
   * {{ :general:201022_qtiplot-1.1.1-win64-no-python.exe |qtiplot-1.1.1-win64-no-python.exe}} (no Python scripting support)
-==== Silent installation ====
+=== Silent installation ===
 It is possible to perform a silent installation of QtiPlot by launching the setup from a command terminal with the "/silent" option:
-  name_of_qtiplot_installer.exe /silent
+<code batch>
+name_of_qtiplot_installer.exe /silent
+</code>
 ----
 ===== macOS =====
+=== M1/M2 ===
   * macOS >= 11.0, Python 3.8: {{ :general:201022_qtiplot-1.1.1-python38-m1.zip |qtiplot-1.1.1-python38-M1.zip}}
-==== Intel (x86_64) ====
+=== Intel (x86_64) ===
   * macOS >= 10.13, Python 3.8: {{ :general:201022_qtiplot-1.1.1-python38-intel.zip |qtiplot-1.1.1-python38.zip}}
   * macOS >= 10.9, Python 2.7: {{ :general:201022_qtiplot-1.1.1-python27-intel.zip |qtiplot-1.1.1-python27.zip}}
-=== Install notes for Intel macs ===
+== Install notes for Intel macs ==
 If you experience a crash when trying to run a fresh installation of QtiPlot on a mac with an Intel chip, please perform the following steps:
@@ Line 49: / Line 60: @@
 Point 3 is only necessary the first time you start QtiPlot, afterwards everything should work normally.
-==== Linux generic binaries ====
+-----
+===== Linux generic binaries =====
 The binaries bellow do not need installation. They can be unarchived and used directly from the resulting folder by typing the following commands in a terminal:
+<code bash>
 tar -xf file_name.tar.bz2
 cd qtiplot-1.1
 ./qtiplot -d&
+</code>
 === Generic binaries (no Python scripting support) ===
+  * 64-bit: {{ :general:201022_qtiplot-1.1.1-linux-64bit.tar.bz2 |qtiplot-1.1.1-64bit.tar.bz2}} (built with Qt 5.9.7 on CentOS 7)
-  * 64-bit: qtiplot-1.1.1-64bit.tar.bz2 (built with Qt 5.9.7 on CentOS 7)
 === ArchLinux (with Python scripting support) ===
@@ Line 69: / Line 82: @@
 </code>
-  * 64-bit: qtiplot-1.1.1-archlinux.tar.bz2 (requires Qt 5.15.6 and Python 3.10.8)
+  * 64-bit: {{ :general:211022_qtiplot-1.1.1-archlinux.tar.bz2 |qtiplot-1.1.1-archlinux.tar.bz2}} (requires Qt 5.15.6 and Python 3.10.8)