Differences

This shows you the differences between two versions of the page.

--- general:mk3s [2022-11-28 08:09] – Markus Rosenstihl
+++ general:mk3s [Unknown date] (current) – external edit (Unknown date) 127.0.0.1
@@ Line 4: / Line 4: @@
 ==== Design Tips ====
+  * [[https://www.digikey.de/en/maker/blogs/2021/designing-for-3d-printing-tips-and-tricks|DigiKey]]
+  * [[https://3dinsider.com/3d-printing-model-design/|3dinsider]]
+  * [[https://makezine.com/article/maker-news/top-ten-tips-designing-models-for-3d-printing/|Make:]]
+Empfohlene "Thin Wall Thickness" für Anzahl Perimeter (Düse 0.4mm):
+|Schichtdicke|2|4|6|8|10|
+|0.1mm|0.88mm|1.74mm|2.59mm|3.45mm|4.31mm|
+|0.2mm|0.86mm|1.67mm|2.49mm|3.30mm|4.11mm|
+|0.3mm|0.84mm|1.61mm|2.38mm|3.15mm|3.92mm|
+  * Überhänge maximal 45° (manchmal geht auch bis 60°)
+  * Support vermeiden
+  * 90° Ecken vermeiden ("Chamfer", "Fillet")
+  * Toleranzen großzügig wählen (+-0.1mm) oder mehrere Versionen zum Test drucken
 ==== Zugang ====